A vulnerability in the PROFINET feature of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, adjacent attacker to cause an affected device to crash and reload, resulting in a denial of service (DoS) condition on the device. The vulnerability is due to insufficient processing logic for crafted PROFINET packets that are sent to an affected device. An attacker could exploit this vulnerability by sending crafted PROFINET packets to an affected device for processing. A successful exploit could allow the attacker to cause the device to crash and reload, resulting in a DoS

Exploiting incorrectly configured access control security levels vulnerability in ENS Firewall in McAfee Endpoint Security (ENS) for Windows prior to 10.7.0 April 2020 and 10.6.1 April 2020 updates allows remote attackers and local users to allow or block unauthorized traffic via pre-existing rules not being handled correctly when updating to the February 2020 updates.

The firmware of InHand Networks InRouter302 V3.5.45 introduces fixes for TALOS-2022-1472 and TALOS-2022-1474. The fixes are incomplete. An attacker can still perform, respectively, a privilege escalation and an information disclosure vulnerability.

A vulnerability in the Cisco Discovery Protocol implementation for Cisco FXOS Software, Cisco IOS XR Software, and Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to cause a reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to a missing check when the affected software processes Cisco Discovery Protocol messages. An attacker could exploit this vulnerability by sending a malicious Cisco Discovery Protocol packet to an affected device. A successful exploit could allow the attacker to exhaust system memory, causing the

Traefik is an HTTP reverse proxy and load balancer. Prior to version 2.6.1, Traefik skips the router transport layer security (TLS) configuration when the host header is a fully qualified domain name (FQDN). For a request, the TLS configuration choice can be different than the router choice, which implies the use of a wrong TLS configuration. When sending a request using FQDN handled by a router configured with a dedicated TLS configuration, the TLS configuration falls back to the default configuration that might not correspond to the configured one. If the CNAME flattening is enabled, the sel

An issue was discovered in Stormshield Network Security (SNS) 4.3.x before 4.3.35. If multicast streams are enabled on different interfaces, it may be possible to interrupt multicast traffic on some of these interfaces. That could result in a denial of the multicast routing service on the firewall.

An authentication bypass vulnerability exists in the requestHandlers.js verifyToken functionality of Milesight VPN v2.0.2. A specially-crafted network request can lead to authentication bypass. An attacker can send a network request to trigger this vulnerability.

A command injection vulnerability exists in the D-Link DIR-882 Router firmware DIR882A1_FW102B02 within the `prog.cgi` and `rc` binaries. The `sub_4438A4` function in `prog.cgi` stores user-supplied DDNS parameters (`ServerAddress` and `Hostname`) in NVRAM via `nvram_safe_set`. These values are later retrieved in the `start_DDNS_ipv4` function of `rc` using `nvram_safe_get` and concatenated into DDNS shell commands executed via `twsystem()` without proper sanitization. Partial string comparison is performed but is insufficient to prevent command injection. An unauthenticated remote attacker ca

A vulnerability was found in rl-institut NESP2 Initial Release/1.0. It has been classified as critical. Affected is an unknown function of the file app/database.py. The manipulation leads to sql injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The patch is identified as 07c0cdf36cf6a4345086d07b54423723a496af5e. It is recommended to apply a patch to fix this issue. VDB-246642 is the identifier assigned to this vulnerability.

An out of bounds read flaw was discovered in libssh2 before 1.8.1 in the way SSH_MSG_CHANNEL_REQUEST packets with an exit status message and no payload are parsed. A remote attacker who compromises a SSH server may be able to cause a Denial of Service or read data in the client memory.

The Western Digital My Cloud Web App [https://os5.mycloud.com/] uses a weak SSLContext when attempting to configure port forwarding rules. This was enabled to maintain compatibility with old or outdated home routers. By using an "SSL" context instead of "TLS" or specifying stronger validation, deprecated or insecure protocols are permitted. As a result, a local user with no privileges can exploit this vulnerability and jeopardize the integrity, confidentiality and authenticity of information transmitted. The scope of impact cannot extend to other components and no user input is required to exp

A command injection vulnerability exists in the D-Link DIR-882 Router firmware DIR882A1_FW102B02 within the `prog.cgi` and `rc` binaries. The `sub_432F60` function in `prog.cgi` stores user-supplied `SetSysLogSettings/IPAddress` values in NVRAM via `nvram_safe_set("SysLogRemote_IPAddress", ...)`. These values are later retrieved in the `sub_448DCC` function of `rc` using `nvram_safe_get` and concatenated into a shell command executed via `twsystem()` without any sanitization. An unauthenticated remote attacker can exploit this vulnerability to execute arbitrary commands on the device through s

A vulnerability in the ISE Posture (System Scan) module of Cisco Secure Client for Linux could allow an authenticated, local attacker to elevate privileges on an affected device. This vulnerability is due to the use of an uncontrolled search path element. An attacker could exploit this vulnerability by copying a malicious library file to a specific directory in the filesystem and persuading an administrator to restart a specific process. A successful exploit could allow the attacker to execute arbitrary code on an affected device with root privileges.

A vulnerability was found in Ruijie RG-EW1200G EW_3.0(1)B11P204. It has been declared as critical. This vulnerability affects unknown code of the file app.09df2a9e44ab48766f5f.js of the component Admin Password Handler. The manipulation leads to improper access controls. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-231802 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

NetMod VPN Client 5.3.1 is vulnerable to DLL injection, allowing an attacker to execute arbitrary code by placing a malicious DLL in a directory where the application loads dependencies. This vulnerability arises due to the improper validation of dynamically loaded libraries.

Dot diver is a lightweight, powerful, and dependency-free TypeScript utility library that provides types and functions to work with object paths in dot notation. In versions prior to 1.0.2 there is a Prototype Pollution vulnerability in the `setByPath` function which can leads to remote code execution (RCE). This issue has been addressed in commit `98daf567` which has been included in release 1.0.2. Users are advised to upgrade. There are no known workarounds to this vulnerability.

The TFTP service in Cisco Unified Communications Manager (aka CUCM or Unified CM) allows remote attackers to obtain sensitive information from a phone via an RRQ operation, as demonstrated by discovering a cleartext UseUserCredential field in an SPDefault.cnf.xml file. NOTE: the vendor reportedly disputes the significance of this report, stating that this is an expected default behavior, and that the product's documentation describes use of the TFTP Encrypted Config option in addressing this issue

An issue in Oncord+ Android Infotainment Systems OS Android 12, Model Hardware TS17,Hardware part Number F57L_V3.2_20220301, and Build Number PlatformVER:K24-2023/05/09-v0.01 allows a remote attacker to execute arbitrary code via the ADB port component.

A vulnerability in the interprocess communication (IPC) channel of Cisco AnyConnect Secure Mobility Client Software could allow an authenticated, local attacker to cause a targeted AnyConnect user to execute a malicious script. The vulnerability is due to a lack of authentication to the IPC listener. An attacker could exploit this vulnerability by sending crafted IPC messages to the AnyConnect client IPC listener. A successful exploit could allow an attacker to cause the targeted AnyConnect user to execute a script. This script would execute with the privileges of the targeted AnyConnect user.

A sql injection vulnerability exists in the requestHandlers.js LoginAuth functionality of Milesight VPN v2.0.2. A specially-crafted network request can lead to authentication bypass. An attacker can send a malicious packet to trigger this vulnerability.